Hot DIP Galvanized/ Stainless Steel Evaporator Cooling Tower Coil

• Condensation Forms: Water-Cooled
• Refrigerant: Ammonia & Freon
• Type: Steam Condenser
• Material: Hot DIP Galvanized/Stainless Steel
• Structural Form: Vertical
• Heat Transfer Mode: Regenerative
• Model NO.: ECB400 ECB500 ECE 900 ECE1200
• Condition: New
• Transport Package: in Nude
• Specification: cutomized
• Trademark: OCEANBLUE
• Origin: Yantai, China

Product Description

Condenser coil for Evaporative Condenser & Cooling Tower

(1) The evaporative condenser is one of the most important parts of the whole refrigeration system.

(2) The condenser condenses the refrigerant gas inside the coil and complete a heat exchange circle.

(3) The evaporative condenser is widely applied to cold storage, ice-store, chemical industry, supermarket and etc.
 

Main Features  (BAC Evaporative Condenser Coil)

(1) Hot dip galvanized (anti-corrosion and long lifetime)

(2) Special tube arrangement ensure a smarter size and high heat-exchange rate.All tubes are tested at 2.5MPa air pressure.

(3) Special oval tube ensure a better contacting of water on the outer surface of the tube.

OCEANBLUE Evaporative condenser use Oval type heat exchange tube,size 31.7*21.6mm, compare the DN25mm round tube,same length the surface more 10% than Round tube.Also the water contact tube Oval type better than Round type.Can see the bellow pictures.
The cross profile decreased then the velocity of medium in the tube comes faster.

(1) Decrease inner diameter of heat exchange tube wiith more compact tube arrangement can increase 65% of the heat exchange area in the same volume .

(2) Special oval tube ensure a better contacting of water on the outer surface of tubes .also can make the form tighter ,less filling rate of liquid and less air flow resistance.
WORKING

(1) The coil section rejects heat through the fresh air evaporating ,on the other side is through the sensible heat effect of pre-cooled circulating spray water .

(2) Reducing the coils' evaporative cooling effect is helpful to reduce the possibility of the coils surface scaling.