| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Type: | Air Cooler |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
copper tube material: φ 5/8''
fin material: aluminium, epoxy coated aluminiumaLMg3
fin spacing: 4, 7, 10, 12 and dual 16: 8 mm
coil pattern: 55 x 55 mm inline
Galvanised sheet, powder coated RAL 9010
Galvanised sheet, powder coated RAL 9010
Tray can be folded down as well as detached from unit for inspection and cleaning
Catalogue capacities are based on difference CA
between air inlet temperature and evaporating
temperature in compliance with ENV328
Capacities shown at operating conditions O
/-8 C are based on 80 RH at air inlet
Capacities showa operating conditions- 18
/-25.C are based on 95 RH at air inlet
For other conditions please use correction factors or contact our oftice or representative
Support brackets suitable Units are supplied with for ceiling mounting For units operating at low temperatures fan peripheral heaters are recommended For units operating below- 40 .C please contact our oml ce. Special materials and fans may be required for such operating conditions All electrical components are in accordance to VDE conditions Alternative tube and fin thickness and materials are available on request
Low noise, maintenance free fan-motors, with protection class F and IP 54, compliant to DIN 40050 Standard motors are suitable for temperatures from -40 to+ 45, however motors with other temperature requirements are available on request. Standard motors are 2 speed and capacities and air flow shown in tables are at high speed (delta wired). Standard air discharge is horizontal, draw througt ,yet other arrangements are possible.
The integral thermal contact (thermistors) must be used as motor protection. We reserve the right to use different fan manufacturers and technical motor data may vary. Power consumption may also vary at different operating temperatures and due to external pressure drop. For corresponding electrical dat please refer to fan/ motor labels on units
Noise pressure levels shown in tables are calculated in accordance with EN13487
ptional against additional pricel
defrosting by water spray iehr... -W
optional against additional pricel
electrical defrosting acc VDE 0720 in coil and drip tray IEHR...-E
hot gas defrosting in coil and drip tray IIEHR...-H
){kind=link}